stand-off voltage - 5.0 to 50 volts peak pulse power - 500 watts plastic package has underwriters laboratory flammability classification 94v-0 glass passivated junctions 500w peak pulse power capability with a 10/1000 m s waveform, repetition rate (duty cycle): 0.01% excellent clamping capability low incremental surge resistance fast response time: typically less than 1.0ns from 0 volts to v (br) ideal for data line applications high temperature soldering guaranteed: 265?/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension case: jedec do-204ac molded plastic over a passivated junction polarity: color band denotes positive end (cathode) mounting position: any weight: 0.015 ounce, 0.4 gram symbol value units peak pulse power dissipation with a 10/1000 m s waveform (note 1 ) p ppm minimum 500 watts steady state power dissipation at t l =75? with lead lengths or 0.375" (9.5mm) p m(av) 3.0 watts peak pulse power surge current with a 10/1000 m s waveform (note 1, fig. 3) i ppm see table 1 amps operating junction and storage temperature range t j , t stg -55 to +175 ? notes: (1) non-repetitive current pulse, per fig. 3 and derated above t a =25? per fig. 2 diode transient voltage suppressor sac5.0-sac50 low capacitance transzorb tm tvs do-15 dimensions in inches and (millimeters) features mechanical data m aximum ratings and el ectrical characteristics rating at 25 ambient temperature unless otherwise specified. ? ? ? ? ? ? ? ? ? ? ? ? http://www.luguang.cn mail:lge@luguang.cn
0 50 100 150 0 25 50 75 100 0 1.0 2.0 3.0 4.0 0 100 150 50 0.1 m s 1.0 m s 10 m s 100 m s 1.0ms 10ms 0.1 1.0 10 100 ratings and characteristic curves sac5.0 thru sac50 series t l , lead temperature, ? fig. 3 - pulse waveform t, time, ms i ppm, peak pulse current, % percentage of rated power, (%) pulse width (td) is defined as the point where the peak current decays to 50% of i pp tr=10 m sec. half value - i pp 2 10/1000 m sec. waveform as defined by r.e.a. peak value i ppm fig. 2 - power derating curve fig. 1 - peak pulse power rating curve p ppm , peak pulse power, kw td, pulse width, sec. non-repetitive pulse waveform shown in fig. 3 t a =25? impulse exponential decay half sine square current waveforms 1.0 0.5 td td td td average power peak power (single pulse) minimum maximum maximum maximum maximum working inverse peak stand-off breakdown reverse clamping peak pulse junction inverse blocking inverse voltage voltage leakage voltage current capacitance blocking leakage blocking (note 1) at i t = 1.0ma at v wm at i pp =5.0a per fig. 3 at voltage current voltage part v wm v (br) i d vc l pp 0 volts v wib at v wib v pib number (volts) (volts) (ua) (volts) (amps) (pf) (volts) i ib (ma) (volts) sac5.0 5.0 7.60 300 10.0 44 50 75 1.0 100 sac6.0 6.0 7.90 300 11.2 41 50 75 1.0 100 sac7.0 7.0 8.33 300 12.6 38 50 75 1.0 100 sac8.0 8.0 8.89 100 13.4 36 50 75 1.0 100 sac8.5 8.5 9.44 50 14.0 34 50 75 1.0 100 sac10 10 11.10 5.0 16.3 29 50 75 1.0 100 sac12 12 13.30 5.0 19.0 25 50 75 1.0 100 sac15 15 16.70 5.0 23.6 20 50 75 1.0 100 sac18 18 20.00 5.0 28.8 15 50 75 1.0 100 sac22 22 24.40 5.0 35.4 14 50 75 1.0 100 sac26 26 28.90 5.0 42.3 11.1 50 75 1.0 100 sac30 30 33.30 5.0 48.6 10.0 50 75 1.0 100 sac36 36 40.00 5.0 60.0 8.6 50 75 1.0 100 sac45 45 50.00 5.0 77.0 6.8 50 150 1.0 200 sac50 50 55.50 5.0 88.0 5.8 50 150 1.0 200 electrical characteristics at (t a =25? unless otherwise noted) table 1 fig. 4 - ac line protection application application note: device must be used with two units in parallel, opposite in polarity as shown in circuit for ac signal line protection low capacitance transient voltage suppressor sac5.0-sac50 low capacitance transzorb tm tvs
|
